SKU: CFW-300 JAN: 4580462334883

Cars Corporation

Water-repellent flat wiper blade (1 blade) [Selectable sizes: 300mm-750mm] Silicone rubber replacement for rain

¥2,800
By ANSWER・JAPAN
size

This is a self-water-repellent wiper blade made by kneading silicone, a water-repellent agent, into the rubber.
It uses a flat type blade that is commonly used in European cars.
Comes standard with a U-clip that can be attached to most domestic cars.
An adapter is also included to allow installation on the top-lock type mounting clips used on vehicles with original flat wipers, which are common on Toyota, Mazda, and Subaru vehicles, so you can simply replace the clip and use it.

■Product specifications

Product name Cars Water-Repellent Flat Wiper
type Flat type (replaceable blade)
material Silicone rubber (self-water repellent type)
Mounting Shape U-clip/Top lock

■About delivery and shipping fees

  • Shipping estimate: Ships within 3 business days after order confirmation
  • Shipping fee: 1,100 yen nationwide
    *Free shipping for purchases of 3,000 yen (tax included) or more per delivery.
▼ Compatible vehicle list (2025 edition) +

Compatible with the standard "U-clip (U-shaped hook)" of Japanese cars.
Please refer to the PDF file below for the latest compatibility information.

▼ Pre-installation work +
  • After opening the package, make sure that the rubber is still attached to the wiper body and that there are no abnormalities such as deformation of parts.
  • Make sure the engine and wiper switches are turned off.

① Check the condition of the glass surface.

<For glass that has not been treated with a water-repellent coating>
Use a remover containing compound to thoroughly remove any oil film, wax, or other film from the glass surface.

<<Water-repellent coated glass>>
Use a remover containing compound to thoroughly remove any oil film, wax, or other film from the glass surface.

*If there is a coating from another manufacturer on the glass, it may affect the operation of this product. In that case, please use a compound remover to thoroughly remove it.

If you use a remover, rinse thoroughly with plenty of water.
If you did not use a remover, wipe off any dirt on the glass surface with a damp towel.

3) Wipe the glass surface with a dry towel and allow it to dry.

▼ Replacement method and installation procedure

① Raise the wiper arm and remove the currently installed wiper.

② Please refer to the installation instructions for each type below before installing this product.

<U-clip (U-hook)>

Open the cover of the wiper body (Image ①) and hook the U-shaped part of the wiper arm onto the clip on the wiper body (Image ②).
After installation, close the main unit cover firmly until you hear a click.

<<Special clip (M-9 adapter)>>

Remove the M-1 adapter that is attached at the time of shipment and attach the included M-9 adapter to the main unit (Image ③).
*Push it in until you hear a click and make sure it is securely attached.
Hook the wiper arm onto the clip on the main body and slide it until you hear a click (Image 4).

★Be careful not to let it fall off When standing up the wiper arm, hold the "wiper arm" and not the wiper itself. If you try to stand it up by holding the wiper itself, it may fall off the arm.

■ Post-replacement work (finishing)

① Double check that the wipers are installed correctly. Also, operate them to make sure they do not hit the body or window frame.

⚠️【Important】
When the glass surface is dry,
Let it run for about 3 minutes with a dry wipe.

This creates a water-repellent coating.
*If the temperature is below 10°C, it may take some time for the coating to form.

⚠️ Handling Precautions (Please read) +
  • Due to the nature of silicone rubber, your hands may turn black when installing the wipers, but this is not a malfunction.
  • After installing this product, a water-repellent film will be formed when the wipers are operated, but the water-repellent performance may vary depending on the vehicle.
  • Do not allow gasoline, oil, or other chemicals to come into contact with the silicone rubber. This will cause a chemical reaction in the rubber, significantly reducing wiping performance.
  • Please remove any oil film, insects, or dirt from the glass surface before use. This may result in some residue remaining or a buzzing noise.
  • If you operate the wipers while there are small stones or dust particles on the glass surface, the glass may be scratched, so be sure to use the washer before using the wipers.
  • Do not bend the wiper blades with excessive force or hit them hard against the glass. If the blades become deformed, wiping performance will be significantly reduced and a rattling noise will occur.
  • Do not operate on frozen glass as this will reduce wiping performance.
  • Depending on the condition of the glass and the amount of rainfall, some friction noise may occur.
View details